Elevator fire control function: the elevator should be able to adapt to the basic requirements of fire control, there are several typical fire control system:
The bottom (or base station) of the elevator is equipped with a special fire switch box with a glass window for fire alarm. When the fire occurs, break the glass window, dial the box switch, you can immediately return to the bottom of the elevator. The bottom (or base station) of the elevator is provided with a special fire switch box with a window for fire protection. There is a special key switch for fire service personnel. If the key switch is turned on, Or base station) of the elevator firefighter used. After the elevator returns to the ground floor (or base station), the dedicated key switch for the fireman's control operation is set on the control box in the car. Fireman special key switch is not located in the car control box, but set in the bottom (or base station) outside the call button box in a button box, as long as the fireman special key switch work, you can make a All elevators in the elevator are put into fire emergency operation.